标签：Volumetric Reagents

Volumetric Reagents,三菱化学,三菱化学代理

体积滴定所需要的物品是卡尔·费歇尔滴定剂和甲醇或脱水溶剂(用于溶解或分散样品)。
AQUAMICRON™提供了广泛的产品，适用于测量不同水平的各种样品的水分含量。用户可根据下表选择适合样品的溶剂。
SS Series (pyridine type)
Product name Use Specification Package
AQUAMICRON™
 Titrant SS 1mg [For General-use]
Low moisture content Samples		 Titer
0.7〜1.2 mgH2O/mL		 500mL
Titrant SS 3mg [For General-use] Titer
2.5〜3.5 mgH2O/mL		 500mL
Titrant SS 10mg [For General-use]
High moisture content Samples		 Titer
8〜12 mgH2O/mL		 500mL
Solvent ML [For General-use]
Organic solvents, Inorganic chemicals, Agricultural chemicals, Pharmaceuticals, Fertilizers, Detergents, Foodstuffs, etc.		 Moisture maximum
0.2 mgH2O/mL		 500mL
Solvent MS [For General-use]
Organic solvents, Inorganic chemicals, Agricultural chemicals, Pharmaceuticals, Fertilizers, Detergents, Foodstuffs, etc.		 Moisture maximum
0.2 mgH2O/mL		 500mL
Solvent CM [For Oils]
Naphtha, Gasolone, Diesel oil, Heavy oil, Electrical insulation oil, Oils and Fats(Hardened oil, Margarine, etc.),etc.		 Moisture maximum
0.3 mgH2O/mL		 500mL
Solvent CP [For Ketones]
Ketones, Silicone oils, Acetic and other lower carboxylic acids, aldehydes(except acetaldehydes),Anilines, etc.		 Moisture maximum
0.5 mgH2O/mL		 500mL
Solvent PP [For Aldehydes]
Acetaldehydes, propionaldehydes, Butyraldehydes, etc.		 Moisture maximum
0.2 mgH2O/mL		 500mL
Solvent PE [For Ketones]
Ketones, Silicone oils, Acetic and other lower carboxylic acids, aldehydes(except acetaldehydes),Anilines, etc.		 Moisture maximum
0.2 mgH2O/mL		 500mL
Solvent FM [For Sugars]
Sugars, Proteins, Gelatine, Additives, Animal feeds, etc.		 Moisture maximum
0.2 mgH2O/mL		 500mL
Solvent ME [For Vaporizer] Gaseous samples, Nitrogen, etc. Moisture maximum
0.2 mgH2O/mL		 500mL
  • When using a moisture vaporization method, mix Solvent MS with propylene glycol(PG) in a 3:1 ratio (e.g. 90mL of MS + 30mL of PG).
  • An addition of 3g of salicylic acid enables the time for dehydration to get shorter at the first measurement in combined use of 50mL of Solvent FM.
  • 当使用水汽汽化方法时，将溶剂MS与丙二醇(PG)按3:1的比例混合(例如90mL MS + 30mL PG)。
    加入3g水杨酸使脱水时间在第一次测量时缩短，同时使用50mL的溶剂FM。

 

Volumetric Reagents,体积试剂,三菱化学

The items required for volumetric titration are a Karl Fischer titrant and methanol or a dehydrated solvent (used to dissolve or disperse the sample).
AQUAMICRON™ offers a wide range of products suitable for measuring the moisture content of various samples at every levels. Users can select a solvent that is suitable for the samples based on the following tables.

SS-Z Series (pyridine-free and chloroform-free type)
Product name Use Specification Package
AQUAMICRON™
 Titrant SS-Z 1mg [For General-use]
Low moisture content Samples		 Titer
0.7〜1.2 mgH2O/mL		 500mL
Titrant SS-Z 3mg [For General-use] Titer
2.5〜3.5 mgH2O/mL		 500mL
1L
Titrant SS-Z 5mg [For General-use]
High moisture content Samples		 Titer
4.5〜5.5 mgH2O/mL		 500mL
1L
Solvent GEX [For General-use]
Organic solvents, Inorganic chemicals, Agricultural chemicals, Pharmaceuticals, Fertilizers, Detergents, Foodstuffs, etc.		 Moisture maximum
0.2 mgH2O/mL		 500mL
Solvent OLX [For Oils]
Naphtha, Gasolone, Diesel oil, Electrical insulation oil, etc.		 Moisture maximum
0.5 mgH2O/mL		 500mL
Solvent OLII [For Oils and Fats]
Naphtha, Gasolone, Diesel oil, Heavy oil, Electrical insulation oil, Oils and Fats(Hardened oil, Margarine, etc.),etc.		 Moisture maximum
0.2 mgH2O/mL		 500mL
Solvent KTX [For Ketones]
Ketones, Silicone oils, Acetic and other lower carboxylic acids, aldehydes(except acetaldehydes),etc.		 Moisture maximum
0.5 mgH2O/mL		 500mL
Solvent SU [For Sugars]
Sugars, Proteins, Gelatine, Additives, Animal feeds, etc.		 Moisture maximum
0.2 mgH2O/mL		 500mL
  • When using a moisture vaporization method, mix Solvent GEX with propylene glycol(PG) in a 3:1 ratio (e.g. 90mL of GEX + 30mL of PG).
  • When using Solvent KTX, it will be needed to make proper adjustments to the parameters. Please contact a manufacturer of the instruments.
  • An addition of 3g of salicylic acid enables the time for dehydration to get shorter at the first measurment in combined use of 50mL of Solvent SU.
  • 当使用水分汽化方法时，将溶剂GEX与丙二醇(PG)按3:1的比例混合(例如:90mL GEX + 30mL PG)。
    在使用溶剂KTX时，需要对参数进行适当的调整。请与仪器的制造商联系。
    加入3g的水杨酸使脱水时间在第一次测量时缩短，同时使用50mL的溶剂SU。