体积滴定所需要的物品是卡尔·费歇尔滴定剂和甲醇或脱水溶剂(用于溶解或分散样品)。
AQUAMICRON™提供了广泛的产品，适用于测量不同水平的各种样品的水分含量。用户可根据下表选择适合样品的溶剂。
AQUAMICRON™提供了广泛的产品，适用于测量不同水平的各种样品的水分含量。用户可根据下表选择适合样品的溶剂。
SS Series (pyridine type)
| Product name | Use | Specification | Package | |
|
AQUAMICRON™
|
Titrant SS 1mg | [For General-use] Low moisture content Samples |
Titer 0.7〜1.2 mgH2O/mL |
500mL |
| Titrant SS 3mg | [For General-use] | Titer 2.5〜3.5 mgH2O/mL |
500mL | |
| Titrant SS 10mg | [For General-use] High moisture content Samples |
Titer 8〜12 mgH2O/mL |
500mL | |
| Solvent ML | [For General-use] Organic solvents, Inorganic chemicals, Agricultural chemicals, Pharmaceuticals, Fertilizers, Detergents, Foodstuffs, etc. |
Moisture maximum 0.2 mgH2O/mL |
500mL | |
| Solvent MS | [For General-use] Organic solvents, Inorganic chemicals, Agricultural chemicals, Pharmaceuticals, Fertilizers, Detergents, Foodstuffs, etc. |
Moisture maximum 0.2 mgH2O/mL |
500mL | |
| Solvent CM | [For Oils] Naphtha, Gasolone, Diesel oil, Heavy oil, Electrical insulation oil, Oils and Fats(Hardened oil, Margarine, etc.),etc. |
Moisture maximum 0.3 mgH2O/mL |
500mL | |
| Solvent CP | [For Ketones] Ketones, Silicone oils, Acetic and other lower carboxylic acids, aldehydes(except acetaldehydes),Anilines, etc. |
Moisture maximum 0.5 mgH2O/mL |
500mL | |
| Solvent PP | [For Aldehydes] Acetaldehydes, propionaldehydes, Butyraldehydes, etc. |
Moisture maximum 0.2 mgH2O/mL |
500mL | |
| Solvent PE | [For Ketones] Ketones, Silicone oils, Acetic and other lower carboxylic acids, aldehydes(except acetaldehydes),Anilines, etc. |
Moisture maximum 0.2 mgH2O/mL |
500mL | |
| Solvent FM | [For Sugars] Sugars, Proteins, Gelatine, Additives, Animal feeds, etc. |
Moisture maximum 0.2 mgH2O/mL |
500mL | |
| Solvent ME | [For Vaporizer] Gaseous samples, Nitrogen, etc. | Moisture maximum 0.2 mgH2O/mL |
500mL | |
- When using a moisture vaporization method, mix Solvent MS with propylene glycol(PG) in a 3:1 ratio (e.g. 90mL of MS + 30mL of PG).
- An addition of 3g of salicylic acid enables the time for dehydration to get shorter at the first measurement in combined use of 50mL of Solvent FM.
- 当使用水汽汽化方法时，将溶剂MS与丙二醇(PG)按3:1的比例混合(例如90mL MS + 30mL PG)。
加入3g水杨酸使脱水时间在第一次测量时缩短，同时使用50mL的溶剂FM。