产品介绍
陶瓷微球是独特的、半透明、白色、细粒度、高强度的微球。 低 VOC 配方是涂料行业的主要驱动因素。 配方设计师使用我们的陶瓷微球来降低 VOC 水平; 增加填充量; 提高硬度; 并为各种涂料配方增加光泽、耐擦洗和耐磨性。由于这些产品的陶瓷化学特性,它们在低至 250 nm 的紫外线下也是透明的,可用于可辐射固化和薄膜粉末涂料。
产品特点
陶瓷微球可用于油漆和涂料,涂层表面易于清洗,甚至可以擦洗。使建筑涂料表面平滑,光泽均匀。不仅在上述应用中,陶瓷微球可提升各种建筑和工业用油漆和涂料的耐久性和性能。
陶瓷微球是高强度的固体颗粒。除了能帮助制造商降低成本和改善加工性能外,该天然坚硬的填料还提升了油漆和涂料配方的功能性以及客户满意度:
增加固体颗粒,减少树脂需求量,同时保持所需性能
可以改善对涂料粘度的控制
可降低配方的挥发性有机物(VOC)含量
抗刮擦、耐燃性、防下垂、使用寿命长、油漆性能提高
填料更紧密、填充量更大,有利于降低成本
可透过低至 250 nm 的紫外线 ,可辐射固化
最后,陶瓷微球帮助油漆和涂料制造商差异化他们的产品,从而提高消费者的吸引力。
产品规格与参数
sku |
产品名称 |
抗压强度 |
密度 |
中值粒径 |
行业 |
C490165-01 |
白色陶瓷微球 W-210 |
>60000psi |
2.4g/cc |
3μm |
油漆 /涂料 |
C490165-02 |
白色陶瓷微球 W-410 |
>60000psi |
2.5g/cc |
4μm |
油漆 /涂料 |
C490165-03 |
白色陶瓷微球 W-610 |
>60000psi |
2.5g/cc |
10μm |
油漆 /涂料 |
|
储存和处理
在使用本产品之前,请阅读并遵循产品标签和安全数据表中的注意事项和使用说明。
Product Description
Ceramic Microspheres are unique, semi-transparent, whitecolored, fine particle size, highstrength microspheres. Formulating to low VOC is a major driving factor in the coatings industry. Our ceramic microspheres are used by formulators to reduce VOC levels; increase filler loadings; improve hardness; and add burnish, scrub and abrasion resistance to a variety of coating formulations.Due to the ceramic chemistry of these products, they are also UV transparent down to 250 nm and have utility in radiation-curable and thin-film powder coatings.
Product features
Ceramic Microspheres can be used in paints and coatings, and the coated surface is easy to clean and even scrub. Makes architectural paint surfaces smooth and even glossy. Not only in these applications, ceramic microspheres enhance the durability and performance of a wide variety of architectural and industrial paints and coatings.
ceramic microspheres are high-strength solid particles. In addition to helping manufacturers reduce costs and improve processability, this naturally hard filler improves functionality and customer satisfaction in paint and coating formulations:
Increase solids and reduce resin requirements while maintaining desired properties
Can improve control of paint viscosity
Reduces volatile organic compound (VOC) content of formulations
Scratch resistance, flame resistance, sag resistance, long life, improved paint performance
Tighter packing and higher packing volume help reduce costs
Transmits UV light down to 250 nm, radiation curable
Finally, ceramic microspheres help paint and coatings manufacturers differentiate their products, thereby increasing consumer appeal.
Product specifications and parameters
sku |
产品名称 英文 |
Crush Strength |
density |
Particle Size (D50) |
industry |
C490165-01 |
Ceramic Microspheres White Grade W-210 |
>60000psi |
2.4g/cc |
3μm |
Paints and Coatings |
C490165-02 |
Ceramic Microspheres White Grade W-410 |
>60000psi |
2.5g/cc |
4μm |
Paints and Coatings |
C490165-03 |
Ceramic Microspheres White Grade W-610 |
>60000psi |
2.5g/cc |
10μm |
Paints and Coatings |
|
Storage and handling
Please read and follow the precautions and directions for use in the product label and Safety Data Sheet before using this product.